Free shipping on orders above £25 across the UK

UK leading top choice

Shop the top disposables brands

One stop shop for all your disposable needs

Replacement Pod Compatibility Guide UK: Which Pods Fit What

Replacement Pod Compatibility Guide UK: Which Pods Fit What

Vape Replacement Pod Compatibility Guide: Which Pods Fit Which Kit

Replacement pods are device-specific, not universal. A pod built for one prefilled pod kit will not fit, seal or perform correctly in a different device, even one from the same brand, if the model name doesn't match exactly. This guide sets out which pods fit which of the major UK prefilled pod kits, why compatibility matters beyond just "will it click in," and how to avoid the single most common ordering mistake in this category.

Key facts:

  • Prefilled pods only fit the exact device generation they're built for; a near-identical name is not the same as a match

  • Every legal UK pod, regardless of brand, is capped at 2ml capacity and paired with a maximum 10ml refill container under TPD rules

  • Mismatched pods are the leading cause of leaking, poor draw and coil damage reported across this category

  • Always match the exact model name printed on your device, not just the brand

 

Why Aren't Vape Pods Universal?

Every prefilled pod is built to a specific physical and electrical fit: the connector shape, the magnetic or click mechanism, and often the coil resistance are all matched to one device generation. A pod that looks similar, even from the same brand, can be a different size, a different connector type, or wired for a different power draw. Forcing an incompatible pod into a device risks a poor seal, leaking, reduced vapour, or in some cases damage to the pod's coil or the device's contacts.

This isn't unique to any one brand. It's true across the entire category, from big-name multi-pod kits like the Bloody Bar 60K and Pyne Pod Click 50K, to single-pod kits like the Hayati Pro Max Plus and IVG Pro 12, to refillable open-pod systems like the Vaporesso XROS or Uwell Caliburn ranges.

 

Vape Replacement Pod Compatibility Guide: Which Pods Fit Which Kit

 

Replacement Pod Compatibility Chart: Major UK Prefilled Pod Kits

Device Compatible pod Pod capacity Notes
Bloody Bar 60K Bloody Bar 60K replacement pods (4-in-1 twist set) 2ml per pod, 4 pods per set Pods are sold as a matched twist-set; a single replacement pod must match the twist mechanism of the 60K generation specifically
Pyne Pod Click 50K Pyne Pod Click refill packs 2ml pod + 10ml refill container Compatible across the wider Pyne Pod Click range, including the Click S 30K dual-flavour refills, but not with the older Pyne Pod Click 10K generation
Hayati Pro Max Plus 6000 Hayati Pro Max Plus 6000 replacement pods 2ml pod + 10ml refill Built specifically for the Pro Max Plus generation; not compatible with the original Pro Max 4000 or the Pro Ultra Plus
Hayati Pro Ultra Plus 25000 Hayati Pro Ultra Plus replacement pods 2 x 2ml pods + 2 x 10ml refills per set Dual-tank pods designed specifically for the Ultra Plus's independent coil system; not interchangeable with Pro Max Plus pods
IVG Pro 12 (also called IVG Pro 10K) IVG Pro 12 refill pods 2ml pod + 10ml refill Same hardware sold under two names; pods for either name fit the same device
IVG Smart Max 10K IVG Smart Max refill pods 2ml pod + 10ml refill Not compatible with the standard IVG Pro range despite similar branding; check the "Smart Max" name specifically
IVG 2400 IVG 2400 replacement pods (4-pod rotating set) 2ml per pod, 4 pods per set Rotating multi-pod system, distinct from both the Pro and Smart Max ranges
Lost Mary BM6000 Lost Mary BM6000 replacement pods 2ml pod + 10ml refill Not interchangeable with Lost Mary BM600 or Nera pods despite the shared brand name
Lost Mary Nera 30K Lost Mary Nera Fullview replacement pods 2ml pod + 10ml refill Specific to the Nera Fullview generation; check for "Fullview" in the product name when ordering
Elf Bar 600 (prefilled pod version) Elf Bar 600 replacement pods 2ml pod Distinct from the Elf Bar JoinOne15 Classic range, which uses its own pod system
Elf Bar JoinOne15 Classic Elf Bar JoinOne Classic replacement pods 2ml pod + refill container Not compatible with standard Elf Bar 600 pods
Vaporesso XROS series Vaporesso XROS Corex pods 2ml, various resistances One of the few genuinely cross-compatible ranges: any XROS pod fits any XROS-family device (XROS, XROS 2, XROS 3, XROS Pro, XROS Mini, XROS Nano)
Uwell Caliburn G3/G4 Caliburn GPP replacement pods 2ml, 0.6 or 0.9Ω Built specifically for the G3/G4 platform; does not fit the original Caliburn G or Caliburn A series
OXVA Xlim series OXVA Xlim V3 or Xlim EZ pods 2ml (V3) or 3ml (EZ) Cross-compatible across most Xlim devices; the Xlim SS pod is the exception, built only for the Xlim Pro 2 DNA

 

How Do I Know Which Pod Fits My Device?

Check the exact model name printed on the device itself or on the original box, not just the brand. This matters most within a single brand's range, where similar names can mean genuinely different, non-interchangeable pods. Hayati alone has released the Pro Max 4000, Pro Max Plus 6000 and Pro Ultra Plus 25000, three devices with similar branding and completely different pods. IVG has the Pro 12 (also called Pro 10K), the Smart Max 10K and the 2400, again three different pod systems under one brand.

If the exact model name isn't visible or the packaging has been lost, most UK vape retailers, including Shop Disposables, can confirm compatibility from a clear photo of the device or the printed model number on its base.

 

2ml Pod, 10ml Refill: Why Every Legal UK Pod Follows The Same Structure

Regardless of brand, every prefilled pod sold legally in the UK follows the same underlying limit: no single pod, tank or cartridge containing nicotine can exceed 2ml, and no nicotine-containing refill bottle can exceed 10ml, under the Tobacco and Related Products Regulations 2016. This is why the compatibility chart above shows the same "2ml pod plus 10ml refill" pattern across almost every device, even though the brands, connectors and mechanisms are all different. Multi-pod kits like the Bloody Bar 60K or Pyne Pod Click 50K simply combine several of these legal-sized units into one kit; the underlying pod itself is still capped at 2ml no matter which brand made it.

Knowing this helps when comparing pods across brands: a "2ml pod" figure on the box tells you it's TPD compliant, not that it will physically fit a different manufacturer's device.

 

Prefilled Vs Refillable Pods: Does Compatibility Work Differently?

Yes, in one important way. Prefilled pods, the type used by the Bloody Bar 60K, Hayati range and IVG Pro 12, are sealed at the factory with a specific flavour and nicotine strength, and are built to fit one device generation only. Refillable pods, used by open systems like the Vaporesso XROS or OXVA Xlim range, are sold empty with a coil inside, and you fill them yourself with any compatible e-liquid.

Refillable pod ranges tend to have broader cross-compatibility within their own family, the XROS Corex pod fitting every XROS-generation device is a good example, because the manufacturer has kept the same physical connector and electrical spec across several device releases. Prefilled pod kits from brands built around the disposable-replacement market (Hayati, Bloody Bar, Pyne Pod, Lost Mary) tend to change the pod design more often between device generations, so cross-compatibility within the same brand is far less reliable and should never be assumed.

 

What Happens If You Use The Wrong Pod?

At best, an incompatible pod simply won't fit or won't make an electrical connection, and the device won't fire. At worst, forcing a similarly shaped but not-quite-matching pod into place can cause a poor seal that leads to leaking, a damaged connector on the device itself, or a coil that fires incorrectly and produces a burnt taste on the very first puff. None of this is covered under most manufacturers' warranty terms, since using a mismatched or third-party pod is typically treated as user error rather than a device fault.

 

Vape Replacement Pod Compatibility Guide: Which Pods Fit Which Kit

 

How To Avoid Ordering The Wrong Replacement Pod

Check the exact model name on the device before ordering, not just the brand. Where a device has a generation number or suffix (Pro Max Plus, Nera Fullview, IVG Pro 12), that suffix usually indicates a genuinely different pod system, not a minor variant. If in doubt, a photo of the device or its printed model number sent to a retailer's customer service team is the fastest way to confirm a match before buying. And where a device supports more than one nicotine strength on the same pod range, such as the IVG Pro 12's 20mg, 10mg and 0mg options, double-check the specific strength is in stock for your chosen flavour, since not every flavour is available across every strength.

 

Suitability Matrix: Matching Your Situation To The Right Pod Purchase

Your situation What to check Why
You've lost the box and don't know the exact model Look for a printed model name/number on the device base or send a photo to the retailer Brand alone isn't enough; similar names within one brand often mean different pods
You're buying pods for a multi-pod kit (Bloody Bar 60K, Pyne Pod Click) Confirm whether the pod is sold as a matched set or individually Some multi-pod systems only sell replacement pods as a full twist-set or refill-pack, not as single units
You want to change nicotine strength Check the specific flavour is stocked in your target strength Not every flavour in a multi-strength range (like IVG Pro 12) is available at every strength
You're switching from a disposable to a prefilled kit for the first time Buy the full starter kit, not just a replacement pod, since you'll need the battery body Replacement pods alone don't include a device; a starter kit is required first
Your pod won't fire after inserting Re-check the model name match before assuming a fault A near-identical but incompatible pod is a more common cause than a genuine device fault

 

What Goes Wrong When Buying Replacement Pods (And How To Avoid It)

  • Ordering by brand name alone. "Hayati pods" or "IVG pods" isn't specific enough; always match the full model name, since most of these brands run several genuinely incompatible pod systems in parallel.

  • Assuming a newer device version accepts older pods. Brands frequently update pod design between device generations even when the outward name looks similar. The IVG Pro 10K to Pro 12 rename is a rare exception where hardware stayed identical; most name changes signal a real change.

  • Buying single pods for a system sold only as a matched set. Multi-pod kits like the Bloody Bar 60K's 4-in-1 twist system are often sold as a complete replacement set rather than individual pods, since the twist mechanism depends on all four being present.

  • Not checking flavour availability across nicotine strengths. For devices offering multiple strengths on one pod range, a specific flavour may only be stocked at 20mg, even if the device itself supports 10mg and 0mg.

  • Assuming third-party or off-brand pods will fit safely. Even where a pod appears to click into place, a mismatched coil resistance or connector spec can cause leaking, poor flavour or, in rare cases, device damage.

 

Replacement Pod Compatibility FAQ

  1. Can I use a pod from a different brand in my device?
    No. Pods are built for a specific device's physical connector and coil spec. Even where the outward pod shape looks similar across brands, cross-brand compatibility isn't supported and can cause leaking or a poor connection.

  2. Will a pod from an older device version work in a newer one from the same brand?
    Usually not, unless the brand has explicitly confirmed the hardware is unchanged, as with the IVG Pro 10K to Pro 12 rename. Most name or generation changes indicate a genuinely different pod design.
     
  3. How do I find out which pod fits my specific device?
    Check the exact model name printed on the device or its original box. If that's not available, a clear photo of the device sent to a retailer's customer service team is the fastest way to confirm compatibility.

  4. Are all vape pods limited to 2ml in the UK?
    Yes. Under the Tobacco and Related Products Regulations 2016, no single pod, tank or cartridge containing nicotine can legally exceed 2ml in the UK, regardless of brand or device.

  5. What's the difference between a prefilled pod and a refillable pod?
    A prefilled pod comes sealed from the factory with a set flavour and nicotine strength and is disposed of once empty. A refillable pod is sold empty with a coil inside, and you fill it yourself with any compatible e-liquid.

  6. Why do multi-pod kits like the Bloody Bar 60K sell pods as a set rather than individually?
    Because the twist or rotation mechanism in these devices is often designed around all pods being present together, some manufacturers only sell replacement pods as a complete matched set rather than single units.

  7. What happens if I force an incompatible pod into my device?
    At best, it simply won't make an electrical connection and the device won't fire. At worst, it can cause leaking, a damaged connector, or a coil that fires incorrectly and produces a burnt taste immediately.

  8. Does using the wrong pod void my warranty?
    Using a mismatched or third-party pod not designed for your specific device is typically treated as user error under most manufacturers' warranty terms, rather than a covered device fault.

  9. Can I buy just the replacement pods without buying the whole starter kit again?
    Yes, for almost all prefilled pod kits, replacement pods (or refill packs) are sold separately from the full starter kit specifically so you only need to replace the consumable part, not the reusable battery body.

  10. Are XROS and Xlim pods really compatible across their whole device range?
    Largely yes. Vaporesso's XROS Corex pods fit any device in the XROS family (XROS, XROS 2, XROS 3, XROS Pro, XROS Mini, XROS Nano), and most OXVA Xlim pods fit across the wider Xlim range, with the Xlim SS pod as a notable device-specific exception.

  11. How often should I replace a pod?
    This depends on the device and how much you vape, but as a general guide, a standard 2ml pod on light-to-moderate use typically needs replacing every few days to two weeks; higher-capacity multi-pod kits last correspondingly longer per set.

  12. I don't know my device's exact model name. What should I do?
    Send a clear photo of the device, including any printed text or model number on its base, to your retailer's customer service team before ordering. This is faster and more reliable than guessing from memory.

 

Compliance And Safety

This guide covers products intended for adult smokers and vapers aged 18 and over only. Vaping products contain nicotine, a highly addictive substance, where nicotine is present. All pods referenced in this guide are subject to a 2ml maximum capacity and 10ml maximum nicotine-containing refill limit under the Tobacco and Related Products Regulations 2016. Reusable vape products remain legal in the UK, while single-use disposable vapes have been banned since 1 June 2025. Always use pods specifically designed for your device model. Charge devices only with a suitable USB-C or manufacturer-approved power source. Keep all vaping products out of reach of children and pets. Dispose of empty pods responsibly through your local recycling scheme. This article makes no medical claims.